Complete Custom 100 Watt LPFM Broadcast Radio Station Kit.

PREWIRED PACKAGE READY FOR SHIPPING (240VAC/120VAC)

Includes: all inter-connecting cables in harness with shrink wrapped labels, easy to follow photo and step by step instruction book.

This package is ideal for USA based LPFM broadcast stations. (Please see important note, below.)

Pre-built and Pre-wired Broadcast Radio Station Kit Includes:

(1) Audio Console

(1) On Air Light & Console Interface

(1) Automation Computer w/Automation

(1) Headphone Amplifier

(1) Production System

(1) Set Powered Studio Monitors

(2) CD/MP3 Decks

(1) FM Processor

(2) Professional Microphones

(1) 1 Bay Circularly Polarized FM Antenna**

(2) Pro Microphone Booms

(1) Up to 150' Coaxial Cable

(3) Headphones

(1) 300 Watt FM Transmitter

Option #1 - For a savings, we can provide a single polarity antenna. However, your signal will tend to suffer somewhat as either the vertical or horizontal component will no longer be present. (We do NOT recommend this.)

We can offer a reduced rate for single (usually horizontal or vertical only) polarization. However, as such a system results in reduced signal coverage and a less robust signal, we do not quote such "sub-standard" systems unless specifically asked.

Buyer beware!!! Most others will automatically quote an inferior (single polarity) system as "standard"!!!

*You will need a desk or table on which to mount the boom arm.

**Antenna requires mounting on a 2.5" to 4.5" pipe (not supplied) The higher an FM antenna is placed, the farther it can "see"...this is what will give you the best coverage for the amount of transmitter output power. This station, as offered, is designed to have the studio at the location of the transmitter and tower.

If you plan to broadcast from a remote transmitter site, additional equipment will be needed.

 

Contact us (below) for a quote and see how easy it is to have the studio of your dreams!

Please plan to allow at least four to six weeks for delivery following our receipt of certified funds.

*Domestic USA Use Requires FCC License or Construction Permit, Additional Remote Control and Emergency Alert System Equipment.